Impact garage doors
Single hung
Double hung
Casement
Bay & bow
Entry doors
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCWS Impact Garage Doors: The San Antonio Owner’s Guide
If your CWS impact garage door has a failed panel, bent track, or a roller that’s grinding against the rail, we stock CWS-compatible replacement parts here in San Antonio and typically install full door systems between $2,800 and $6,400 depending on size, finish, and reinforcement level. Most owners discover the problem the same way: the door starts hesitating halfway up, or a corner sags, or a storm season inspection reveals stress cracks along the panel seams. We keep common CWS door components on our trucks, and our San Antonio crew can usually have a full replacement scheduled within the week. Call (325) 420-4173 for a written, line-item quote before any work is scheduled.
Key Takeaways
- We stock CWS-compatible impact door panels, tracks, rollers, hinges, and reinforcement struts in San Antonio.
- Installed CWS impact garage door systems typically run $2,800 to $6,400 in this market, depending on size and wind-load rating.
- CWS doors are built for coastal wind zones, which means replacement parts are heavier gauge than standard San Antonio garage door parts, and not every supplier carries them.
- We’re an independent San Antonio provider, not a CWS factory store, so we match parts by spec and series rather than badge only.
- Every quote is written before work starts, with no change orders at the end.
Styles & brands we work with
Which CWS Models This Applies To
CWS impact garage doors come in a few distinct series, and the replacement part has to match both the series and the wind-load rating stamped on the door. Most San Antonio homes with CWS doors have one of three configurations: a single-car door in the 8×7 to 9×7 range, a double-car door in the 16×7 to 18×8 range, or a custom opening that was ordered to fit a taller ceiling line. The model number lives on a white or silver label near the top of the door’s interior face, often printed on the end stile of the top panel. That label lists the wind-load rating, the manufacturing date, and the panel profile code. If the label is gone, we measure the panel thickness and the track gauge to identify the series, because CWS uses heavier extrusions than a standard San Antonio garage door and a generic panel won’t seat correctly against the CWS hinge pattern.
One compatibility gotcha we see regularly: CWS panels are not interchangeable with a generic impact-rated panel from another manufacturer, even when the dimensions look identical. The hinge spacing and panel profile are specific to CWS tooling. For older CWS doors in San Antonio, the original panel design may be retired, which means we match an aftermarket equivalent that carries the same wind-load certification. We’ll always tell you whether we’re quoting an OEM panel, a factory-remainder panel, or a certified aftermarket replacement, and we put that in writing before ordering.
Signs Your CWS Impact Garage Doors Is Failing
- The door hesitates or shudders when lifting. That’s usually a roller binding in a worn track or a hinge pin that’s ovaled out from years of San Antonio heat cycling. The door still works, but every cycle is putting more load on the panel edges.
- A visible sag at one corner when the door is half open. On a CWS door, that’s often a failed internal strut or a cracked stile, not a spring issue. The weight of the impact-rated panel pulls the corner down over time.
- Stress cracks along the panel face or at the seam between sections. In San Antonio, the summer heat bakes the panel face and the overnight cool-down contracts it. Hairline cracks turn into bigger ones, and a compromised panel stops meeting its wind-load rating.
- The door bangs or rattles in the track during high wind. CWS doors are built to stay put in a storm, so movement in the track means a roller or bracket has worn past its tolerance. That’s the point where the door starts working against itself.
- The bottom seal is torn or the door sits slightly off-level. A torn seal lets dust and water into a San Antonio garage during monsoon-season storms, and an off-level door wears the hinges unevenly and shortens the life of every panel connection.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In San Antonio, a full CWS impact garage door replacement typically runs between $2,800 and $6,400 installed, depending on the opening size, the wind-load rating, and whether you’re replacing a single panel or the entire door system. A single panel repair runs lower, often between $400 and $900 when we can match the panel profile, but a panel-only fix on a CWS door only makes sense when the rest of the door is in good condition. The bigger driver is wind-load rating: a door rated for 150 mph will be heavier, with thicker panels and reinforced hardware, and that shows up in both the part cost and the labor time.
What the price includes: disposal of the old door and hardware, the new panels or full door system, all rollers, hinges, and brackets, a new bottom seal, and a balance and safety inspection after install. We’re an independent San Antonio provider, not affiliated with CWS, so you’ll hear an honest recommendation on whether a repair or a replacement makes sense for your door. Keith Yamada has served San Antonio garages long enough to know that the older CWS doors in this area often fail at the panel seams before the tracks ever go, and he’ll tell you which repair will actually last. Every job comes with a written quote before work begins, no change orders at the end, and the workmanship warranty spelled out on the invoice.
DIY or Call Us?
Some things on a CWS door are safe to check yourself: whether the bottom seal sits flush against the ground, whether the rollers look worn or cracked, and whether any hinge screws have backed out. You can also clear debris from the track and confirm that the weather-stripping along the sides isn’t pulling away. But a word of caution: CWS impact doors carry torsion springs under high tension, and that spring assembly is not a do-it-yourself repair. When a door is sitting crooked or refusing to lift, the spring is often fighting gravity and losing. Releasing that tension without the right tools is how people end up in urgent care. If your door is off-balance, we’ll send a background-checked, uniformed tech to San Antonio addresses, and they’ll put a written price in front of you before touching a single bolt. Call (325) 420-4173 and we’ll set it up.
FAQs
A CWS impact garage door in San Antonio generally lasts 12 to 18 years before the panel seams or hardware start to age out, though the spring assembly typically wears faster and may need replacement around the 8 to 10 year mark. The heat and occasional hail in this area shorten the life of the exterior finish compared to a coastal climate, which is why we recommend a spring and track inspection every few years. Call (325) 420-4173 if you want us to check yours.
Yes, a CWS impact door can often be repaired when the damage is limited to a single panel, a roller, a hinge, or the bottom seal, and that repair usually costs between $400 and $1,200 depending on the part. A full replacement makes more sense when multiple panels show stress cracks or the track itself has spread. We’ll show you the condition of your door in plain terms and give you both prices in writing.
A standard CWS impact garage door replacement takes one day on site for most San Antonio homes, though custom or oversized doors may run into a second day. We’ll confirm the expected time before we start, and we’ll leave the floor swept and the old door hauled away when we’re done.
We keep the most common CWS-compatible parts in our San Antonio inventory, including rollers, hinges, bottom seals, track sections, and select panel profiles. For less common panel types or specific wind-load ratings, we order directly and keep you posted on lead time. Either way, we don’t schedule the work until we know exactly what’s needed.
Written by Keith Yamada, Owner, Lightwell Windows San Antonio at Lightwell Windows San Antonio, serving San Antonio and nearby areas.
Six Reasons Homeowners Choose Lightwell Windows San Antonio
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.